Pneumatic Air Arbor Press, Table Top, C-Frame Steel Plated Assembly 250 lbs (1/8 Ton)
Price:
PRODUCT HAS BEEN DISCONTINUED
Product ID:
PAP-CFSPA-025XX
Lead Time:
2 to 4 weeks
Return Policy:
14 days for a full refund

Product Specifications

Overall Dimensions (inch):
8 Wide x 12 Deep x 15 High
Table Dimensions (inch) :
8 Wide x 6 Deep
Cylinder Force:
250 lbs force at 100 psi
Stroke Length (inch):
From 2 to 8 inch (customer specified)
Tolerance (inch):
+/- 0.050
Press Material:
4140/4142 Alloy Steel
Cylinder Bore:
2 inch

Features

2 inch bore Cylinder (user specified stroke)
Pressure Regulator and gauge
2 position 5 way valve (to pneumatically actuate the cylinder) - you may select an electric actuation valve
A Table top press frame, with mounts, ready to be incorporated into any pneumatic line.
Two press buttons (both buttons must be pressed to actuate the cylinder)
Heavy Duty, C-Frame Cast Iron Design
Made from 4140/4142 Alloy Steel

Description

This Pneumatic Air Arbor Press is fully assembled and ready to use. It features a, 2 inch bore, double acting air cylinder which is rated at a force of 250 lbs at 100 psi supply air pressure. Included with this order are a pressure regulator which allows for an adjustment of pressure from 10psi to 120 psi. Two push buttons, which both must be pressed in order to actuate the air cylinder.

This product is fully tested and ready to be incorporated into your assembly, all that is required is to connect this press to an air supply. It`s designed as a table top press which takes up very little space.

This Pneumatic air press is specifically designed to help you reduce implementation and manufacturing cost when small crimping, heat sealing, swaging, forming, riveting, pressing, burnishing, or any other task which may require you to use an air press to meet your needs.

Products Quality

Our Acrylic Vacuum Chambers come with a one year warranty and our quality promise. The Chambers are robust and designed to be operated frequently for several years and are the result of years of continuous improvement, research, design, and development.

The ruggedized chamber walls are fabricated through our acrylic interlocking technology using specifically formulated vacuum glue-epoxy. Our adhesion expertise is one of our many trade secrets we utilize to build our chambers. This commitment to engineering excellence results in our acrylic vacuum chambers being so durable where issues such as deflection, beveling, collapsing, or wall separation are completely eliminated.

The 3 ports on this chamber are connected through threaded Aluminum Ports to a KF25/NW25 vacuum bulkhead fitting located on the acrylic wall or lid. This means that we do not thread into acrylic; hence the risk of cracking/crazing of threads over time is non-existent. Additionally, our acrylic chamber can easily be coupled to a KF25/NW25 vacuum connection.

We offer an amazing vacuum spec on this chamber at 0.075 Torr (75 micron) which impressively places this chamber into medium vacuum category. The Vacuum loss rate (leak tightness) of this chamber is 50 microns per minute initially which later decreases and then levels off. Therefore, this chamber will not lose more than 5.25 Torr (0.2 inHg) in 24 hours.

We would also like to acknowledge and thank many of our satisfied customers who over the years have helped us build better chambers by providing us with invaluable cooperation and feedback. Their inputs not only helped us improve on already fantastic chambers we were building for them, they have also improved the product quality for our future customers.

Please feel contact us with any questions you may have.

See our Acrylic Vacuum Chamber Video Gallery and Slide Show

Frequently Asked Questions

1. What kind of vacuum pump should I use with this unit?
Any rotary vein pump (single stage or two stage) up to 7.5 CFM is ideal. A higher CFM pump will pull a faster desired vacuum level as opposed to a lower CFM pump. Keep in mind that the vacuum rating of this chamber is 0.075 Torr (75 micron), therefore any vacuum pump that has a vacuum rating of 0.075 Torr (75 micron) or less will work fine. We go in great detail explaining how to select a proper pump for your chamber, the article can be found here: Selecting a Proper Vacuum Pump for your Acrylic Vacuum Chamber

2. What is the strongest vacuum that can be achieved with this unit?
The vacuum level depends on the type of vacuum pump you plan to use with the unit. This chamber is rated at 0.075 Torr (75 micron), therefore a proper pump will enable a 0.075 Torr (75 micron) vacuum.

3. Do I need anything else in order to use this chamber?
The vacuum valve port is an 1/4 in NPT sized port, depending on how you would like to connect your vacuum pump to the chamber, you will have to purchase a hose (preferably vinyl reinforced), a barb (1/4 NPT male end to barb), and a couple of hose clamps from your local hardware store. However, if you contact us after you have placed your order and before we have shipped it, we will include a barb, two hose clamps, and about 5 feet reinforced vinyl hose as a customer courtesy.

4. Will the material I am degassing expand during operation?
Yes. To determine how much you can effectively degass at a time, we recommended that you first experiment with small amounts of material/liquids.

5. Can this chamber be heated?
Yes, many of our customers routinely heat these chambers. The chamber can safely be heated up to 110 F (43 C), in excess of that the user assumes all risk.

5. How come your chambers are better and cheaper than anything else out there? What`s the deal here?
It`s called vertical integration. We buy the acrylic material straight from the wholesaler, build-to-order the acrylic chamber in house, and sell it ourselves, effectively eliminating two middle men and a huge warehouse during this process. Not only are resources saved doing this, we also have full control over the design and manufacturing process meaning that you get the best acrylic vacuum chamber at the lowest cost and lead times.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.