Price:
$18750
Product ID:
ALTSIM-ACHSH-242424
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Additional Vacuum Chamber, Pump, or Controller Images

Check out some of our portable vacuum chamber and pump systems. All our vacuum chambers, vacuum controller, vacuum systems, or anything else that we make can be customized to your requirements and specifications. Contact us if to learn how we can build you a fantastic vacuum system.

Product Specifications

Ultimate Vacuum:
0.025 Torr (25 micron)
Maximum Altitude:
45 Miles
Chamber Material:
Crystalline Clear Acrylic
Lid:
Crystalline Clear Acrylic
User Interface:
7 inch HMI Touch Panel
Voltage:
115V

Features

Simulate 45 Miles Altitude
Fully Setup Turn-Key System
Portable 4 Lockable Swivel Casters
Hinged Front Door
Fully Transparent Lid
Fully Transparent Chamber
7 inch HMI Touch Panel
Customizable Altitude Recipes
1 Year Safe Buyback Warranty

Description

Altitude Simulation System, made by Sanatron, fully setup and ready to go. This Altitude simulation system will allow you to simulate altitudes inside the vacuum chamber up to 45 miles / milliTorr (25 micron). A full Turn-Key System included are a Front Door Loading Crystalline Clear Acrylic Vacuum Chamber, cube 24 inch inside dimensions, a 7 CFM rotary vane vacuum pump, an altitude simulation controller, all sitting on a table frame that includes four lockable swivel casters.

This system will enable you to simulate any altitude up to 45 miles. (NOTE: If you need higher altitudes, we can make that happen, contact us) The mode of operation is that you close the vacuum chamber lid, clamp it, set your attitude, press start and watch the vacuum pump ramp up the vacuum inside the chamber. Once the set altitude has been reached, the vacuum valve will close, and the chamber will hold this altitude for as long as needed. You also have the ability to program your recipe and set and hold several altitudes.

Many of our altitude simulation systems are customized to our clients specifications and requirements. Therefore, if you need a vacuum feedthrough, or if you need to run thermocouples into the chamber, please contact us and we can make that happen. Furthermore, anything on this system can be customized so be sure to let us know how we can help you build your system.

Did you know that we carry a many more products?

Our clients prefer to work with us because we are Experts in Vacuum Science and Technology. You should check out some of our other items we carry; click on the links below.

Stainless Steel Vacuum Chambers
Stainless Steel Vacuum Chambers are vacuum chambers made from stainless steel. The advantages of a Stainless Steel Vacuum Chamber are High Vacuum and a Wide Temperature Range of applications.
Piston Vacuum Pumps
Piston Vacuum Pumps are devices that generate a vacuum through the workings of an internal piston. Several advantages of a piston pump include, low maintenance, no oil mist emission since it’s an oil free vacuum pump – the shortcoming are not as high of vacuum levels and volumetric flow.
Our Work: Pressure and Vacuum Chamber used for Calibration of Weather Stations across the US
Have you ever wondered how the weather forecast works? You must admit; the weathermen (or weatherwoman) have become a whole lot more accurate over time. 10 years ago, the weather forecast was not as accurate as it is today. Part of the reason is that we have better forecasting technology as in more powerful computers who crunch numbers faster to out a most likely scenario. Another reason is that mathematics, physics, and science has progressed. The main reason however, is that we have better tools and equipment.
Related Articles: Vacuum Levels of Acrylic Vacuum Chambers
In this article we will discuss the vacuum levels of an acrylic vacuum chamber. This article also covers the leak rate or the leak tightness of the acrylic chamber. Additionally, we are going to recommend a rule of thumb used for vacuum pump selection based on the size of the vacuum chamber.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.