Price:
$
Contact us for Pricing
Product ID:
CSS-SSHSH-242424
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Vacuum Rating
10-6 Torr (1 microTorr)
Vacuum Loss Rate
1 Torr (0.04 inHg) in 24 hours
Inside Dimensions (inch)
24 High X 24 Wide X 24 Deep
Product Dimensions (inch)
29 High X 29 Wide X 29 Deep
Tolerance (inch)
+/- 0.125
Chamber Material
Stainless Steel
Lid Material
Stainless Steel
Seal
Buna O-Ring
Approximate Volume
13824 cubic inch - 60 Gallon - 227 Liters

Features

Hinge Side Door, Front Loading
Door Handle
2 Clamps
Stainless Steel Chamber
Clear Acrylic Door
QTY:3 x NW25 Ports
One Year Safe Buyback Guarantee

Description

Our Stainless-Steel vacuum chambers are robustly designed and quality built ready to be implemented into any vacuum project. This vacuum chamber is made from stainless steel body and stainless-steel door. The stainless-steel door has a High Vacuum Viewport so that you can view your chamber interior. The internal dimensions of this vacuum chamber are 24 inches Wide, 24 inches Deep, and 24 inches High. The vacuum rating for this chamber is 10-6 Torr (microTorr Range) Keep in mind that you will need the appropriate vacuum pump in order to reach the microTorr vacuum range.

The door is front loading and hinged. Included with this chamber are a robust and ergonomic Lid Handle, door hinges, two ?get-out-of-the-way? toggle clamps, and three NW25 Ports. The operational range of stainless-steel vacuum chambers is -190 Degrees Celsius and +290 Degrees Celsius. In addition to a broad operational range, Stainless Steel vacuum chambers are more chemically resistant to thinners, alcohols, and acetones.

This vacuum chamber has three Quick Flange 25 (QF25) Vacuum Ports on the Right wall. One of these ports is intendent to be for your venting valve, another one was intended to be for your vacuum valve, the third QF port was intended to be for your vacuum gauge. You will have to add the valves and the gauge in addition to this chamber in order to have it operational. However, what valves and gauges you select will depend on your application. Keep in mind that we do offer connection hardware and vacuum pumps to go along with the vacuum chamber as a fully system. Feel Free to contact us if there is anything else that we can do for you.

Get your Vacuum Pump with your Vacuum Chamber!

One of the most common mistakes people make is to try to source every single part for their vacuum system themselves. The end results is either the wrong vacuum pump, the wrong connection hardware, or a sub optimal Vacuum System.

We have sourced the most appropriate vacuum pump for you so that you don’t have to. Get your vacuum chamber and vacuum pump and connection hardware for a complete vacuum system! Click here to get your Vacuum Pump and Vacuum Chamber System

You may be interested in some of our other items

We make Robustly Designed and Quality Engineered Systems. There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Portable Vacuum Chamber and Pump Systems
We carry a wide range of portable vacuum chamber and pump systems. A Portable Vacuum Chamber and Pump system is placed onto a frame structure and lockable swivel casters which enable you to move your vacuum chamber and pump system around your facility. Our portable vacuum systems are very popular among businesses that are constantly growing, evolving, or sharing. Our portable vacuum systems are moved with ease from location to location.
Altitude Simulation Controller Instruments
An Altitude simulation Controller is type of vacuum controller that simulates a certain altitude because altitude can be derived from vacuum levels. An altitude simulation controller will enable you to hold your vacuum level at a certain altitude equivalent of testing, run an altitude vs time profile, or rate of change of altitude vs. time. Further options include a vacuum pump relay that will control when the vacuum pump turns on and a vacuum valve.
Our Work: Vacuum Storage of Pharmaceutical Products and Medical Supplies
A pharmaceutical manufacturer contacted us to build them a large vacuum storage system for their pharmaceutical products. They were looking for as much footprint as possible which is why they got a two-chamber system from us. They needed a total of 6 shelves per chamber including trays. Finally, they were looking to have both chambers to be placed on a table frame assembly with lockable swivel casters. What you are seeing is a two chamber system, each chamber is our 20 inch cube acrylic vacuum chamber, front load hinged door. Each chamber can be accesses independently while the other is under vacuum. The trays can be easily loaded and unloaded. This whole system can also be moved to anywhere in their facility.
Related Articles: Visual Inspection Quality Testing of Heat Sealed Packages
Visual inspection is an attractive option because it does not require the purchase of any additional equipment. There are several arguments against Visual Inspection of heat seals; the argument against visual inspection is that visual inspection is subjective, unreliable, operator dependent, or not a valid method of inspection. However, if you have the correct training, procedures, and documentation in place, visual inspection can become a powerful tool in your quest for better packaging.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.