Price:
$1053
Product ID:
WELCH-2522B-01
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Free Air Displacement:
0.75 CFM
Ultimate Vacuum (absolute):
100 Torr
Positive Pressure Rating:
100 psi
Pump Type:
Piston
Pump Category:
Dry / Oil Free
Pump Duty Type:
Medium
Motor Power:
0.125 HP

Features

* WOB-L Techology, Compact, reciprocating design for vacuum or pressure
* Table Top Application
* Suction Cup Feet
* Oil-Less, Non-Lube, Piston and Cylinder
* Permanently lubricated bearings
* Perfect Vacuum and Pressure Pump for indoor settings
* No Oil, Vapor, and Contaminat Emissions
* Maintenance Free
* Welch Vacuum Manufacturer Warranty

Description

Welch, Dry, Oil Free Vacuum and Pressure Pump featuring WOB-L technology. This particular model number is 2522B-01. The free air flow rate is 0.75 CFM and the ultimate vacuum rating is 100 Torr or (25.9inHg of Vacuum). This Pump comes with a power cord and a user manual. This is a very popular vacuum pump among laboratories, educational institutions, pharma, and biotech industries due to the fact that this pump is low maintenance and and oil free (dry) which can be used in indoor and closed rooms and environments without the risk of oil contamination. It does not come with connection hardware you will need to connect this vacuum pump your vacuum system. The Intake Port Thread of this pump is a 1/4 inch FNPT. Connected to this Intake port is a barb hose fitting for the 3/16 inch ID vacuum hose. To connect this pump to you vacuum system, you have two choices:

1. You can either connect a reinforce vinyl hose with 3/16 ID to the already present Barb Fitting.

2. You can unscrew the Barb Fitting and screw on your own fitting. Sometimes going from 3/16 inch ID hose to 1/4 inch ID hose will decrease your pump-down times by a factor of about 1.5.

We have many more resources on our website that you should check out

We treat our customers well by Over-Delivering on our Promises (reason why we are Highly Rated on Google My Business). There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Vacuum Decay Leak Testing Systems
Vacuum Decay Leak Testing Systems are Instruments that detect and quantify a leak by measuring the drop in vacuum (pressure) inside the specimen. During a vacuum decay leak test, the specimen is placed into a vacuum chamber, the vacuum is pulled to a specified setpoint, and the drop in vacuum is monitored and recorded over time. If a leak in the specimen exists, the air will travel from a higher pressure (inside the specimen) to a lower pressure (vacuum chamber). As a results of the additional air, the vacuum levels will drop whereas a leak can be detected and quantified.
Power Vacuum Feedthroughs
Power vacuum feedthroughs are hermetically sealed off the shelf components used to transfer electrical power from the outside of the vacuum chamber into the inside of the vacuum chamber without compromising the vacuum. One example application would be powering an electronic device inside the vacuum chamber
Our Work: Vacuum Storage of Pharmaceutical Products and Medical Supplies
A pharmaceutical manufacturer contacted us to build them a large vacuum storage system for their pharmaceutical products. They were looking for as much footprint as possible which is why they got a two-chamber system from us. They needed a total of 6 shelves per chamber including trays. Finally, they were looking to have both chambers to be placed on a table frame assembly with lockable swivel casters. What you are seeing is a two chamber system, each chamber is our 20 inch cube acrylic vacuum chamber, front load hinged door. Each chamber can be accesses independently while the other is under vacuum. The trays can be easily loaded and unloaded. This whole system can also be moved to anywhere in their facility.
Related Articles: Bubble Leak Testing using an Acrylic Vacuum Chamber
Bubble Leak Testing or Bubble Emission Testing is a procedure where leaks are visually detected and located through the emission of bubbles while the test specimen is submerged in water. In this article, we will talk about using an acrylic vacuum box as a leak detection device. We are also going to talk about the advantage, disadvantage, and the bubble leak emission test procedures.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.