Price:
$17775
Product ID:
CSS-SSHSH-121212
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Vacuum Rating
10-6 Torr (1 microTorr)
Vacuum Loss Rate
1 Torr (0.04 inHg) in 24 hours
Inside Dimensions (inch)
12 High X 12 Wide X 12 Deep
Product Dimensions (inch)
16 High X 16 Wide X 16 Deep
Tolerance (inch)
+/- 0.125
Chamber Material
Stainless Steel
Lid Material
Stainless Steel
Seal
Buna O-Ring
Approximate Volume
1728 cubic inch - 7.5 Gallon - 28.3 Liters

Features

Hinge Side Door, Front Loading
Door Handle
2 Clamps
Stainless Steel Chamber
Clear Acrylic Door
QTY:3 x NW25 Ports
One Year Safe Buyback Guarantee

Description

Our Stainless-Steel vacuum chambers are robustly designed and quality built ready to be implemented into any vacuum project. This vacuum chamber is made from stainless steel body and stainless-steel door. The stainless-steel door has a High Vacuum Viewport so that you can view your chamber interior. The internal dimensions of this vacuum chamber are 12 inches Wide, 12 inches Deep, and 12 inches High. The vacuum rating for this chamber is 10-6 Torr (microTorr Range) Keep in mind that you will need the appropriate vacuum pump in order to reach the microTorr vacuum range.

The door is front loading and hinged. Included with this chamber are a robust and ergonomic Lid Handle, door hinges, two ?get-out-of-the-way? toggle clamps, and three NW25 Ports. The operational range of stainless-steel vacuum chambers is -190 Degrees Celsius and +290 Degrees Celsius. In addition to a broad operational range, Stainless Steel vacuum chambers are more chemically resistant to thinners, alcohols, and acetones.

This vacuum chamber has three Quick Flange 25 (QF25) Vacuum Ports on the Right wall. One of these ports is intendent to be for your venting valve, another one was intended to be for your vacuum valve, the third QF port was intended to be for your vacuum gauge. You will have to add the valves and the gauge in addition to this chamber in order to have it operational. However, what valves and gauges you select will depend on your application. Keep in mind that we do offer connection hardware and vacuum pumps to go along with the vacuum chamber as a fully system. Feel Free to contact us if there is anything else that we can do for you.

Get your Vacuum Pump with your Vacuum Chamber!

One of the most common mistakes people make is to try to source every single part for their vacuum system themselves. The end results is either the wrong vacuum pump, the wrong connection hardware, or a sub optimal Vacuum System.

We have sourced the most appropriate vacuum pump for you so that you don’t have to. Get your vacuum chamber and vacuum pump and connection hardware for a complete vacuum system! Click here to get your Vacuum Pump and Vacuum Chamber System

Did you know that we carry a many more products?

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Vacuum Decay Leak Testing Systems
Vacuum Decay Leak Testing Systems are Instruments that detect and quantify a leak by measuring the drop in vacuum (pressure) inside the specimen. During a vacuum decay leak test, the specimen is placed into a vacuum chamber, the vacuum is pulled to a specified setpoint, and the drop in vacuum is monitored and recorded over time. If a leak in the specimen exists, the air will travel from a higher pressure (inside the specimen) to a lower pressure (vacuum chamber). As a results of the additional air, the vacuum levels will drop whereas a leak can be detected and quantified.
Roots Blower Vacuum Pumps
Roots Blower Vacuum Pumps are used when a large amount of Volumetric Airflow is Required. Root Vacuum Pumps cannot operate independently and must be used in conjunction with another roughing pump such as Rotary Vane Pump or Piston Pump. The advantages of a Roots Vacuum Pump is that the Pumping Speed can be increased by a factor of 5 up to a factor of 10; meaning that a 20 CFM Rotary Vane Vacuum Pump can now be boosted to pump 120 CFM!
Our Work: Chamber for Vacuum Extrusion System
This is a custom acrylic vacuum chamber build for a high volume manufacturer of parts which are fabricated using vacuum extrusion techniques. The challenge was to build a vacuum chamber system which mated on two perpendicular surfaces; on the bottom and on the rear of the chamber. This was accomplished by incorporating a double gasket mechanism on the bottom and incorporating a clamping mechanism on the rear.
Related Articles: Visual Inspection Quality Testing of Heat Sealed Packages
Visual inspection is an attractive option because it does not require the purchase of any additional equipment. There are several arguments against Visual Inspection of heat seals; the argument against visual inspection is that visual inspection is subjective, unreliable, operator dependent, or not a valid method of inspection. However, if you have the correct training, procedures, and documentation in place, visual inspection can become a powerful tool in your quest for better packaging.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.