If you have a need to measure the temperature of your specimen inside a vacuum chamber, adding a vacuum thermocouple feedthrough is the best way to go. You have a wide selection and options when it comes to thermocouples.
A vacuum thermocouple feedthrough will enable temperature measurement of your specimen inside the vacuum chamber while the chamber is under vacuum without compromising the vacuum performance. You can measure the temperature while the chamber is at ambient, during vacuum pump-down, or deep vacuum.
We use off the shelf vacuum feedthrough components from a list of carefully selected and verified vendors. You can use a Type C, Type E, Type J, Type K, Type N, Type R-S, and Type T. The way we connect these Vacuum Thermocouple Feedthroughs is through either threaded port, NW/KF/QF fitting, or Conflat Flange. Each port can have from a single pair, 2 Pair, 3 Pair, 4 Pair, 5 Pair, even 10 Pair!
When Specifying the thermocouple Feedthrough you would like to add to your vacuum chamber, the only information we need is the type and number of pairs from you and we will do the rest. We will select the best thermocouple for your application.
Contact Us to discuss your vacuum thermocouple options and how we can make your process even better.