Price:
$11500
Product ID:
IPSYS-F2096-803020
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Additional Vacuum Chamber Images

Please take a look at additional images of our internal pressurization leak testing tank. Fortunately, this tank is customizable and can be customized to your requirements. Feel free to contact us if you have any questions.

Product Specifications

Product Dimensions (inch):
86 Wide 33 Deep 36 High
Inside Tank Dimensions (inch):
80 Wide, 30 Deep, 20 High
Max Water Level Depth:
17 inches
Table Dimensions (inch):
86 Wide 33 Deep 12 High
Tolerance (inch)
+/- 0.125
Tank Material:
Clear Cast Acrylic
Lid Material:
Clear Cast Acrylic
Table Material
8020 Inc. Errector Set, Aluminum, Grey
Pressure Probe Accuracy:
1%

Features

** Quality Built Clear Acrylic Tank **
** Overflow Safety Tank **
** Hinged, Lockable, and Transparent Top Loading Acrylic Lid **
** 1-inch NPT Tank Drain Valve **
** 1-inch NPT Overflow Drain **
** Table Structure that holds the Clear Acrylic Tank robustly into place **
** Adjustable Height Feet, Or Lockable Casters **
** Pressurization System Fully Assembled - Including Precision Flow Control Valve, Magnehelic Differential Pressure Gage, Pitot-Style Static Probe **
** One Year Safe Buyback Guarantee **

Description

This is an internal pressurization bubble testing system that is designed specifically to enable you to properly, comprehensibly, and effectively perform the package integrity test; including but not limited to the ASTM F2096. This package integrity test is fully setup and ready to go, there is no assembly or additional work required.

This system comes with three main components: 1. Quality Built, Clear Acrylic Bubble Leak Testing Tank: The inside dimensions of the acrylic tank are 80 inch Wide by 30 inch Deep by 20 inch High at 9 inch water height. The acrylic tank also comes with one hinged and lockable lid. This lid is used to keep the inflated specimen submersed during the leak test. 2. Table structure: The Table is 26 inch Wide by 15 inch deep by 24 inch high. Depending on your request, it comes with either Lockable Casters or Adjustable Feet. The table is made from 8020 Inc. Aluminum Industrial Erector Sets. 3. A Pressurization System: for Bubble Leak Testing, including the test probe and connection components. Lastly, this system includes the Pressurization System that is also assembled. The pressurization system consists of a Precision Flow Control Valve, Magnehelic Differential Pressure Gage, and a Pitot-Style Static Probe that can be inserted into your test specimen.

Finally, this internal pressurization system can be used for any type of pressurized leak test of specimen such as IV bags, heat sealed bags, rigid containers, even machined components. This system is especially popular among items that can be easily connected to a pressurized line such as plastic tanks. The main advantage of this internal pressurization leak testing system is that the leak can be detected and located via the emission of bubbles. Another advantage is that this leak testing system can also test for connection adapters quality – meaning that the specimen connections can also be a source of leakage, this system will detect this type of defect through the emission of bubbles at the connection.

Similar Items

We treat our customers well by Over-Delivering on our Promises (reason why we are Highly Rated on Google My Business). Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Pressure Decay Leak Testing Systems
Pressure Decay Leak Testing Systems are instruments that detect and quantify a leak by measuring the pressure drop over specified amount of time. Any specimen that is inflated will stay inflated if it is leak tight. On the other hand, of a leak exists in the inflated specimen, air will escape through the orifice and decrease the pressure inside the specimen. The higher the pressure drop, the high the leak.
BNC Vacuum Feedthroughs
Coaxial Vacuum Feedthroughs are vacuum rated BNC connectors that enable you to run BNC from outside of vacuum chamber towards inside of the vacuum chamber without disturbing the vacuum. Triaxial Vacuum Feedthroughs, just like coax vacuum feedthroughs, will enable you to run Triax Connections from outside towards the inside of the vacuum chamber without disturbing the vacuum levels inside the vacuum chamber.
Our Work: High Altitude Vacuum Testing of Electrical Connectors and Components
This was an interesting project where one of our customers needed to test wires up to 44 inches long within a high altitude simulation environment. In addition to testing wires, several other electric connectors required altitude testing as well. The altitude requirements were 100,000 feet (30.510 km) which corresponds to 8.36 Torr - a piece of cake when it comes to the vacuum requirements of our chambers.
Related Articles: High Altitude Package Testing utilizing an Acrylic Vac Chamber
An Acrylic Vacuum Chamber can be used to simulate elevation very reliably to altitudes up to 60.9 km or 200,000 feet. This provides several advantages over other testing methods as acrylic is transparent and enables full view of interior during testing. In this article, we will give you a through guide on what can be done to eliminate the risk of packaging damage during shipments at high altitudes.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.