Price:
$3225
Product ID:
PSI-ACVAA-101010
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Additional Vacuum Chamber Images

Please take a look of some of the work we had the pleasure of doing for our clients. All our systems can be customized to your request. Feel free to contact us to see how we can help you design and build a good custom pressure and vacuum system.

Product Specifications

Vacuum Rating
0.075 Torr (75 micron)
Pressure Rating:
5 PSIG
Inside Dimensions (inch):
10 W X 10 D X 10 H
Product Dimensions (inch):
17 W X 17 D X 17 H
Tolerance (inch)
+/- 0.125
Chamber Material
Clear Cast Acrylic
Lid Material
Clear Cast Acrylic
Seal
Buna O-Ring
Approximate Volume
1000 cubic inch - 4.3 Gallons - 16.4 liters

Features

Fully removable Lid
Pressure AND Vacuum Gauge
Vent Valve 1/4 NPT
Vacuum Valve 1/4 NPT
Two Handles
8 Thumb Screw Clamps
5 PSIG pop-open Pressure Relief Safety Valve
One Year Safe Buyback Guarantee

Description

This is our pressure and vacuum chamber made from crystal clear acrylic capable of full vacuum (Torr Rating) and 5 psi gauge pressure. The inside dimensions of this chamber are 10 inch cube. This acrylic chamber comes with two (2) 1/4 inch NPT valves. One valve is used to supply vacuum or pressure to your chamber, the other is used for venting your chamber. You are also supplied with a dial vacuum and pressure gauge which will indicate either vacuum or pressure in dual scale in kilopascal (kPa) and PSI. Additionally, there are two handles that are placed on the fully removable lid. The lid is clamped down by thumb clamps during pressure operations.

This chamber also comes with a vacuum rated pressure relief valve that will pop open and release excess pressure if the pressure inside exceeds 5PSI so you never have to worry about inadvertently over pressurizing your chamber. There is also a 10PSIG and 15PSIG option available, please contact us to inquire more.

Fortunately, this chamber can be customized, many of our clients do so because they have specific project needs. Please reach out to us and we will be happy to have the opportunity to look at your requirements and customization needs.

Did you know that we carry a many more products?

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Force Decay Leak Testing Systems
Force Decay Leak Testing Systems are instruments that detect and quantify leaks in a test specimen through measuring the drop in force an inflated specimen applied onto a pressure transducer. The specimen is placed into a vacuum chamber, a vacuum is pulled, and the test sample inflates. As the test sample inflates, it applied a specific force onto the force transducer. This force is measured and recorded over time. If a leak exists, the specimen will deflate and lose pressure, as a result, the force it applies onto the force transducer will decrease. This in turn will enable for detection and quantification of a leak in the specimen.
Micro-D Vacuum Feedthroughs
Micro D Vacuum Feedthroughs are Micro D connectors rated for vacuum and are generally installed on the vacuum chamber wall. You can then connect from the outside to the inside of your chamber.
Our Work: Vacuum Storage of Chemicals that interact with Stainless Steel
There are countless chemicals and metals that interact with Steel or Stainless Steel. According to our investigation, Gallium, Cadmium, Beryllium, and Zinc are some examples of materials which will interact with Steel or Stainless Steel during vacuum Storage.
Related Articles: Vacuum Levels of Acrylic Vacuum Chambers
In this article we will discuss the vacuum levels of an acrylic vacuum chamber. This article also covers the leak rate or the leak tightness of the acrylic chamber. Additionally, we are going to recommend a rule of thumb used for vacuum pump selection based on the size of the vacuum chamber.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.