Price:
$2750
Product ID:
PSI-ACVAA-121212
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Additional Vacuum Chamber Images

Please take a look of some of the work we had the pleasure of doing for our clients. All our systems can be customized to your request. Feel free to contact us to see how we can help you design and build a good custom pressure and vacuum system.

Product Specifications

Vacuum Rating
0.075 Torr (75 micron)
Pressure Rating:
5 PSIG
Inside Dimensions (inch):
12 W X 12 D X 12 H
Product Dimensions (inch):
19 W X 19 D X 19 H
Tolerance (inch)
+/- 0.125
Chamber Material
Clear Cast Acrylic
Lid Material
Clear Cast Acrylic
Seal
Buna O-Ring
Approximate Volume
1728 cubic inch - 7.5 Gallon - 28.3 Liters

Features

Fully removable Lid
Pressure AND Vacuum Gauge
Vent Valve 1/4 NPT
Vacuum Valve 1/4 NPT
Two Handles
8 Thumb Screw Clamps
5 PSIG pop-open Pressure Relief Safety Valve
One Year Safe Buyback Guarantee

Description

This is our pressure and vacuum chamber made from crystal clear acrylic capable of full vacuum (Torr Rating) and 5 psi gauge pressure. The inside dimensions of this chamber are 12 inch cube. This acrylic chamber comes with two (2) 1/4 inch NPT valves. One valve is used to supply vacuum or pressure to your chamber, the other is used for venting your chamber. You are also supplied with a dial vacuum and pressure gauge which will indicate either vacuum or pressure in dual scale in kilopascal (kPa) and PSI. Additionally, there are two handles that are placed on the fully removable lid. The lid is clamped down by thumb clamps during pressure operations.

This chamber also comes with a vacuum rated pressure relief valve that will pop open and release excess pressure if the pressure inside exceeds 5PSI so you never have to worry about inadvertently over pressurizing your chamber. There is also a 10PSIG and 15PSIG option available, please contact us to inquire more.

Fortunately, this chamber can be customized, many of our clients do so because they have specific project needs. Please reach out to us and we will be happy to have the opportunity to look at your requirements and customization needs.

We have many more resources on our website that you should check out

Our clients prefer to work with us because we are Experts in Vacuum Science and Technology. Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Vacuum Degassing Systems
Vacuum Degassing Systems enable you to remove trapped gas inside your liquids - generally, epoxies. Degassing is a vital part of any two part or more mixing process, this includes but is not limited to epoxy, pharmaceutical mixing, potting, recipe creation. A vacuum degassing system consists of a vacuum pump, connection hardware (includes filters and traps) and a vacuum chamber.
Thermocouple Vacuum Feedthroughs
Thermocouple Vacuum Feedthrough are air-tight components that enable the measurement of temperature inside the vacuum chamber during vacuum operations. If you have to run thermocouple wires into the vacuum chamber in order to measure temperature of a specimen during vacuum operation, a thermocouple vacuum feedthrough will enable you to do that.
Our Work: Bubble Leak Testing System with a Dry off Sink used for Leak Testing Large Bags
How do you leak test Large Food Bags? This is the same question a Large Food and Beverage Processor had asked themselves because they had need for a bubble leak testing system which could be used to detect presence of leaks in their large bags. Their requirements were to test several sized bags with the largest bag being 24 inches Wide by 12 inch Deep by 9 inches High. In addition to the bubble leak testing system, they also needed a way to dry the bags after the test.
Related Articles: Clear Acrylic Vac Chamber Review
In this article we take a closer look into acrylic vacuum chambers, what they are used for, the advantages of using a clear acrylic vac chamber, what to look for, and where to purchase one.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.