Price:
$5573
Product ID:
WELCH-1402B-01
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Free Air Displacement:
5.6 CFM
Ultimate Vacuum (absolute):
0.001 Torr (1 micron)
Pump Type:
Rotary Vane
Pump Category:
Belt Drive
Pump Duty Type:
Heavy Duty
Motor Power:
0.5 HP
Intake Port:
1.0-20
Exhaust Port:
1.0-20
Oil Capacity:
2100

Features

High Quality
High Performance
Chemical Resistant
High Oil Capacity
High Service Life
Low Operational Temperature
Low Wear and Tear

Description

Welch Belt Drive vacuum pump model 1402B-01 giving you an ultimate vacuum of 0.001 Torr (1 micron) and a volumetric flow rate of 5.6 CFM. These belt driven rotary vane vacuum pumps are ruggedized and built to perform and last in demanding environments and applications.

The Belt Driven Rotary Vane Pump has a high oil capacity which also yields a high contamination tolerance. Furthermore, the lower operational RPM, which is about 3 times less than a direct drive rotary vane pump, will result in a longer service life due to lower operational temperature (about 10 degrees less) and less wear and tear.

The trade-off are that these types of pumps are heavier than its direct drive rotary vane counterparts, require more oil, and have more moving parts such as wheel and pulley.

Some of our Popular Items

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). You should check out some of our other items we carry; click on the links below.

Vacuum Chamber and Pump Systems
Our Vacuum Chamber and pump systems are fully setup and ready to go. What you get is a vacuum chamber, a vacuum pump, and connection hardware. We carry acrylic or metallic vacuum chambers and a whole range of vacuum pumps from Rotary Vane, Piston, or Venturi. What type of vacuum chamber and pump system you want depends on your project requirement, budget, and other specifications.
Ethernet Vacuum Feedthroughs
Ethernet Vacuum Feedthroughs are Vacuum Rated Ethernet connectors that enable you to run ethernet cables into your vacuum chamber. Simply connect your ethernet connector to the outside of the vacuum chamber and another ethernet cord from the inside and run it into your part present inside your vacuum chamber.
Our Work: Chamber for Vacuum Extrusion System
This is a custom acrylic vacuum chamber build for a high volume manufacturer of parts which are fabricated using vacuum extrusion techniques. The challenge was to build a vacuum chamber system which mated on two perpendicular surfaces; on the bottom and on the rear of the chamber. This was accomplished by incorporating a double gasket mechanism on the bottom and incorporating a clamping mechanism on the rear.
Related Articles: Dry and Wet Vacuum Leak Quality Testing of Sachets Filled with Powder or Liquid
This article will talk about how to test the seal integrity of food bars. You will understand what you will need to do in order to ensure good seal quality. This article covers the seal integrity testing of Breakfast bars, Chocolate candy bars, Crisped rice bars, Energy bars, Granola bars, Health bars, Protein bars, Fruit and Nut Bars, Meal Replacement Bars or any other food bar sealed with a flow wrapper.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.