Price:
$6305
Product ID:
WELCH-1402C-46
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Free Air Displacement:
5.6 CFM
Ultimate Vacuum (absolute):
0.001 Torr (1 micron)
Pump Type:
Rotary Vane
Pump Category:
Belt Drive
Pump Duty Type:
Heavy Duty
Motor Power:
0.5 HP
Intake Port:
1.0-20
Exhaust Port:
1.0-20
Oil Capacity:
2100

Features

High Quality
High Performance
Chemical Resistant
High Oil Capacity
High Service Life
Low Operational Temperature
Low Wear and Tear

Description

Welch Belt Drive vacuum pump model 1402C-46 giving you an ultimate vacuum of 0.001 Torr (1 micron) and a volumetric flow rate of 5.6 CFM. These belt driven rotary vane vacuum pumps are ruggedized and built to perform and last in demanding environments and applications.

The Belt Driven Rotary Vane Pump has a high oil capacity which also yields a high contamination tolerance. Furthermore, the lower operational RPM, which is about 3 times less than a direct drive rotary vane pump, will result in a longer service life due to lower operational temperature (about 10 degrees less) and less wear and tear.

The trade-off are that these types of pumps are heavier than its direct drive rotary vane counterparts, require more oil, and have more moving parts such as wheel and pulley.

WAIT! Take a look at similar Items you may like…

We make Robustly Designed and Quality Engineered Systems. You should check out some of our other items we carry; click on the links below.

Internal Pressurization ASTM F2096 Leak Testing Systems
Internal Pressurization (ASTM F2096) Leak Testing Systems are instruments that are used during the Quality Control process to discover leaks in sealed packages. As opposed to the vacuum bubble leak test, where the specimen is subjected to a vacuum, the internal pressurization integrity test creates a pressure difference and drives the air through a leak by internally pressurizing the specimen. Our Internal Pressurization Leak Testing Systems are designed and built to conform to the ASTM F2096 Protocol Standard.
D-SUB Vacuum Feedthroughs
D-Sub Vacuum Feedthroughs are universal connectors that enable you to connect from the outside towards the inside of your vacuum chamber. We carry a large list of D-subminiature connectors for your vacuum applications such as the 9 pin, 15 pin, 25 pin, 37 pin, and 50 pin or a combination of any described.
Our Work: Leak Quality Testing and Quality Control of Packets
Quality Control during Production runs is a very important procedure you must perform on your manufactured products. This is especially critical is you are an FDA manufacturer where regulatory compliance is important and necessary. Our Vacuum Chambers are specifically built to assist you meet your Quality Control and Regulatory compliance needs.
Related Articles: Seal and Package Integrity Testing of Vacuum Sealed Packages
How do you test the seal of vacuum sealed packages? If you are vacuum sealing your packages, you are faced with a challenge when it comes to seal testing. How do you know that your process is consistently creating a good seal? How can you be sure that the vacuum inside you package will hold for the required amount of time?

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.