Price:
$2731
Product ID:
WELCH-3022-01
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Free Air Displacement:
1.8 CFM
Ultimate Vacuum (absolute):
0.0003 Torr (3*10-4 Torr)
Pump Type:
Rotary Vane
Pump Category:
Direct Drive
Pump Duty Type:
Heavy Duty
Motor Power:
0.27 HP
Intake Port:
NW 16
Exhaust Port:
NW 16
Oil Capacity:
450 mL

Features

High Quality
High Performance
Fastening Holes
Gas Ballast
Force Oil Lubrication
Anti-Suckback Valve
Thermal Overload Protection

Description

Welch CRV Pro 2 Model 3022-01 direct drive Rotary Vane Vacuum Pump. One advantage of the CRV Pro Vacuum pump is that has an much more increased reliability and longer service life vs other high performance, heavy duty vacuum pumps. The reason this rotary vane vacuum pump can achieve much higher robustness and reliability is because of three main point. First, this vacuum pump will run 10 Degrees Celsius cooler than other comparable pumps which means that the corrosion and wear and tear is slowed down. Second, this vacuum pump has 40% larger oil capacity than comparable vacuum pump, this larger oil capacity will further dilute any corrosive constituents inside the vacuum pump. Third, this vacuum pump has a chemical resistant coating in the oil case and pump module which means that all non-moving parts are protected from corrosion. Furthermore, the CRV Pro Rotary Vane Vacuum Pump consumes up to 36% less oil than other comparable vacuum pumps – this decreases the service and maintenance requirements of this vacuum pump.

The CRVPro Vacuum Pump includes all feature you need from a direct drive rotary vane vacuum pump such as Quick Flange Intake and Exhaust, Fastening Holes, Gas Ballast, Force Oil Lubrication, Anti-Suckback valve, and thermal overload protection

Common Applications include but are not limited to: degassing, vacuum ovens, vacuum concentrations, vacuum leak testing, altitude simulation, freeze drying, electronic equipment testing, and other vacuum applications. Please note that Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr. Contact us to discuss your vacuum applications.

WAIT! Take a look at similar Items you may like…

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Force Decay Leak Testing Systems
Force Decay Leak Testing Systems are instruments that detect and quantify leaks in a test specimen through measuring the drop in force an inflated specimen applied onto a pressure transducer. The specimen is placed into a vacuum chamber, a vacuum is pulled, and the test sample inflates. As the test sample inflates, it applied a specific force onto the force transducer. This force is measured and recorded over time. If a leak exists, the specimen will deflate and lose pressure, as a result, the force it applies onto the force transducer will decrease. This in turn will enable for detection and quantification of a leak in the specimen.
D-SUB Vacuum Feedthroughs
D-Sub Vacuum Feedthroughs are universal connectors that enable you to connect from the outside towards the inside of your vacuum chamber. We carry a large list of D-subminiature connectors for your vacuum applications such as the 9 pin, 15 pin, 25 pin, 37 pin, and 50 pin or a combination of any described.
Our Work: Bubble Leak Testing System with a Dry off Sink used for Leak Testing Large Bags
How do you leak test Large Food Bags? This is the same question a Large Food and Beverage Processor had asked themselves because they had need for a bubble leak testing system which could be used to detect presence of leaks in their large bags. Their requirements were to test several sized bags with the largest bag being 24 inches Wide by 12 inch Deep by 9 inches High. In addition to the bubble leak testing system, they also needed a way to dry the bags after the test.
Related Articles: Anatomy of the Pressure Decay, Vacuum Decay, and Force Decay Curve
How do you know that you have a good part during your leak test? In order to understand your leak test, you must first understand the Test Decay Curve and what it tells you about your test specimen. There is a certain way that a test specimen behaves during the leak test.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.