Price:
$8250
Product ID:
COO-ACVSS-202020
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Additional Vacuum Chamber Images

Please take a look at additional product images of our Top Load, Hinged and Supported Lid Acrylic Vacuum Chamber. All our chambers can be modified. Please contact us if you are looking for a custom acrylic chamber.


The Only Acrylic Vacuum Chamber robustly designed and quality manufactured
to consistently perform and meet your needs!

Product Specifications

Vacuum Rating
0.075 Torr (75 micron)
Vacuum Loss Rate
5.25 Torr (0.2 inHg) in 24 hours
Inside Dimensions (inch)
20 High X 20 Wide X 20 Deep
Product Dimensions (inch)
23 High X 23 Wide X 23 Deep
Tolerance (inch)
+/- 0.125
Chamber Material
Clear Cast Acrylic
Lid Material
Clear Cast Acrylic
Seal
Buna O-Ring
Approximate Volume
8000 cubic inch - 34.6 Gallon - 131.1 Liters

Features

Gas Spring Supported Hinged Top Lid
Dial Vacuum Gauge
Vent Valve 1/4 NPT
Vacuum Valve 1/4 NPT
Lid Handle
2 Clamps
One Year Safe Buyback Guarantee

Description

20 inch X 20 inch X 20 inch chamber is made of clear acrylic which is fully transparent enabling a full view of chamber interior during operation. This is a complete clear acrylic vacuum chamber; assembled and ready for use. It comes with a vacuum gauge, two valves, two handles, two clamps, and two gas springs to keep your lid from slamming down against the chamber.

A Vacuum chamber can also be used as a Desiccator cabinet. Common applications include vacuum testing, vacuum product testing, degassing, defoaming, mixing liquids, bubble leak testing, vacuum sealing, vacuum drying, vacuum encapsulation, vacuum joining, vacuum impregnation, atmospheric testing and simulation, biological tests or storing samples under sustained low and intermediate vacuums.

Please note that plastic material is permeable; therefore, acrylic chambers as such may not maintain a stable vacuum level over extended period of time. For stable vacuum levels in this chamber, it is advisable to either leave the vacuum line or pump constantly connected to this chamber or add a vacuum controller to control vacuum levels.

Get your Vacuum Pump with your Vacuum Chamber!

One of the most common mistakes people make is to try to source every single part for their vacuum system themselves. The end results is either the wrong vacuum pump, the wrong connection hardware, or a sub optimal Vacuum System.

We have sourced the most appropriate vacuum pump for you so that you don’t have to. Get your vacuum chamber and vacuum pump and connection hardware for a complete vacuum system! Click here to get your Vacuum Pump and Vacuum Chamber System

WAIT! Take a look at similar Items you may like…

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Force Decay Leak Testing Systems
Force Decay Leak Testing Systems are instruments that detect and quantify leaks in a test specimen through measuring the drop in force an inflated specimen applied onto a pressure transducer. The specimen is placed into a vacuum chamber, a vacuum is pulled, and the test sample inflates. As the test sample inflates, it applied a specific force onto the force transducer. This force is measured and recorded over time. If a leak exists, the specimen will deflate and lose pressure, as a result, the force it applies onto the force transducer will decrease. This in turn will enable for detection and quantification of a leak in the specimen.
Digital Vacuum Gauge Instruments
A Digital Vacuum Gauge is an instrument which precisely measures a vacuum level inside a vacuum chamber. Unlike a rough dial vacuum gauge, which shows only where the vacuum chamber is roughly with an error of up to 3% (a high as 1 inHg) a digital vacuum gauge will show vacuum levels up to 3 significant figure in Torr and millitorr – this makes the digital vacuum gauge ten thousand times more accurate than the dial vacuum gauge.
Our Work: Chamber for Vacuum Extrusion System
This is a custom acrylic vacuum chamber build for a high volume manufacturer of parts which are fabricated using vacuum extrusion techniques. The challenge was to build a vacuum chamber system which mated on two perpendicular surfaces; on the bottom and on the rear of the chamber. This was accomplished by incorporating a double gasket mechanism on the bottom and incorporating a clamping mechanism on the rear.
Related Articles: Selecting a Proper Vacuum Pump for your Acrylic Vacuum Chamber
In this article we will talk about Vacuum Pumps - but also about other equipment which is used to produce vacuum inside a closed system or chamber. We will talk about the workings of a vacuum pump, vacuum generation, pump down, pump horsepower. This article is intended to provide you a practical guide which should help you select the appropriate vacuum pump for your system.

Products Quality

Our Acrylic Vacuum Chambers come with a one year warranty and our quality promise. The Chambers are robust and designed to be operated frequently for several years and are the result of years of continuous improvement, research, design, and development.

The ruggedized chamber walls are fabricated through our acrylic interlocking technology using specifically formulated vacuum glue-epoxy. Our adhesion expertise is one of our many trade secrets we utilize to build our chambers. This commitment to engineering excellence results in our acrylic vacuum chambers being so durable where issues such as deflection, beveling, collapsing, or wall separation are completely eliminated.

The 3 ports on this chamber are connected through threaded Aluminum Ports to a KF25/NW25 vacuum bulkhead fitting located on the acrylic wall or lid. This means that we do not thread into acrylic; hence the risk of cracking/crazing of threads over time is non-existent. Additionally, our acrylic chamber can easily be coupled to a KF25/NW25 vacuum connection.

We offer an amazing vacuum spec on this chamber at 0.075 Torr (75 micron) which impressively places this chamber into medium vacuum category. The Vacuum loss rate (leak tightness) of this chamber is 50 microns per minute initially which later decreases and then levels off. Therefore, this chamber will not lose more than 5.25 Torr (0.2 inHg) in 24 hours.

We would also like to acknowledge and thank many of our satisfied customers who over the years have helped us build better chambers by providing us with invaluable cooperation and feedback. Their inputs not only helped us improve on already fantastic chambers we were building for them, they have also improved the product quality for our future customers.

Please feel contact us with any questions you may have.

See our Acrylic Vacuum Chamber Video Gallery and Slide Show

Frequently Asked Questions

1. What kind of vacuum pump should I use with this unit?
Any rotary vein pump (single stage or two stage) up to 7.5 CFM is ideal. A higher CFM pump will pull a faster desired vacuum level as opposed to a lower CFM pump. Keep in mind that the vacuum rating of this chamber is 0.075 Torr (75 micron), therefore any vacuum pump that has a vacuum rating of 0.075 Torr (75 micron) or less will work fine. We go in great detail explaining how to select a proper pump for your chamber, the article can be found here: Selecting a Proper Vacuum Pump for your Acrylic Vacuum Chamber

2. What is the strongest vacuum that can be achieved with this unit?
The vacuum level depends on the type of vacuum pump you plan to use with the unit. This chamber is rated at 0.075 Torr (75 micron), therefore a proper pump will enable a 0.075 Torr (75 micron) vacuum.

3. Do I need anything else in order to use this chamber?
The vacuum valve port is an 1/4 in NPT sized port, depending on how you would like to connect your vacuum pump to the chamber, you will have to purchase a hose (preferably vinyl reinforced), a barb (1/4 NPT male end to barb), and a couple of hose clamps from your local hardware store. However, if you contact us after you have placed your order and before we have shipped it, we will include a barb, two hose clamps, and about 5 feet reinforced vinyl hose as a customer courtesy.

4. Will the material I am degassing expand during operation?
Yes. To determine how much you can effectively degass at a time, we recommended that you first experiment with small amounts of material/liquids.

5. Can this chamber be heated?
Yes, many of our customers routinely heat these chambers. The chamber can safely be heated up to 110 F (43 C), in excess of that the user assumes all risk.

5. How come your chambers are better and cheaper than anything else out there? What`s the deal here?
It`s called vertical integration. We buy the acrylic material straight from the wholesaler, build-to-order the acrylic chamber in house, and sell it ourselves, effectively eliminating two middle men and a huge warehouse during this process. Not only are resources saved doing this, we also have full control over the design and manufacturing process meaning that you get the best acrylic vacuum chamber at the lowest cost and lead times.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.