Price:
$7556
Product ID:
WELCH-1376B-10
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Free Air Displacement:
10.6 CFM
Ultimate Vacuum (absolute):
0.001 Torr (1 micron)
Pump Type:
Rotary Vane
Pump Category:
Belt Drive
Pump Duty Type:
Heavy Duty
Motor Power:
N/A
Intake Port:
1.0-20
Exhaust Port:
1.0-20
Oil Capacity:
2400

Features

High Quality
High Performance
Chemical Resistant
High Oil Capacity
High Service Life
Low Operational Temperature
Low Wear and Tear

Description

Welch Belt Drive vacuum pump model 1376B-10 giving you an ultimate vacuum of 0.001Torr (1 micron) and a volumetric flow rate of 10.6 CFM. These belt driven rotary vane vacuum pumps are ruggedized and built to perform and last in demanding environments and applications. NOTE: NO Motor Present, you must purchase your own drive motor.

The Belt Driven Rotary Vane Pump has a high oil capacity which also yields a high contamination tolerance. Furthermore, the lower operational RPM, which is about 3 times less than a direct drive rotary vane pump, will result in a longer service life due to lower operational temperature (about 10 degrees less) and less wear and tear.

The trade-off are that these types of pumps are heavier than its direct drive rotary vane counterparts, require more oil, and have more moving parts such as wheel and pulley.

Some of our Popular Items

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Vacuum Oven Systems
Vacuum Ovens are vacuum chambers and ovens combined in one system. Vacuum ovens are necessary during processes which require the specimen to be subjected to a hypobaric and hyperthermal environment. Our Vacuum Oven Systems enable to you run a complete vacuum vs time and temperature vs time profile. We also carry portable vacuum oven systems and custom vacuum oven systems.
Liquid and Gas Vacuum Feedthroughs
A Liquid and Gas Vacuum Feedthroughs are tubes that will allow you to run liquid or gas into your vacuum chamber without contaminating the vacuum levels or vacuum chamber in general. Say you are looking to run a coolant into the vacuum chamber and cool a component you are testing. You can simply install a liquid and gas vacuum feedthrough are run your coolant towards your test specimen.
Our Work: High Altitude Vacuum Testing of Electrical Connectors and Components
This was an interesting project where one of our customers needed to test wires up to 44 inches long within a high altitude simulation environment. In addition to testing wires, several other electric connectors required altitude testing as well. The altitude requirements were 100,000 feet (30.510 km) which corresponds to 8.36 Torr - a piece of cake when it comes to the vacuum requirements of our chambers.
Related Articles: Selecting a Proper Vacuum Pump for your Acrylic Vacuum Chamber
In this article we will talk about Vacuum Pumps - but also about other equipment which is used to produce vacuum inside a closed system or chamber. We will talk about the workings of a vacuum pump, vacuum generation, pump down, pump horsepower. This article is intended to provide you a practical guide which should help you select the appropriate vacuum pump for your system.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.