Price:
$4934
Product ID:
WELCH-1405B-10
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Free Air Displacement:
3.2 CFM
Ultimate Vacuum (absolute):
0.001 Torr (1 micron)
Pump Type:
Rotary Vane
Pump Category:
Belt Drive
Pump Duty Type:
Heavy Duty
Motor Power:
N/A
Intake Port:
1.0-20
Exhaust Port:
1.0-20
Oil Capacity:
2100

Features

High Quality
High Performance
Chemical Resistant
High Oil Capacity
High Service Life
Low Operational Temperature
Low Wear and Tear

Description

Welch Belt Drive vacuum pump model 1405B-10 giving you an ultimate vacuum of 0.001 Torr (1 micron) and a volumetric flow rate of 3.2 CFM. These belt driven rotary vane vacuum pumps are ruggedized and built to perform and last in demanding environments and applications. NOTE: NO Motor Present, you must purchase your own drive motor.

The Belt Driven Rotary Vane Pump has a high oil capacity which also yields a high contamination tolerance. Furthermore, the lower operational RPM, which is about 3 times less than a direct drive rotary vane pump, will result in a longer service life due to lower operational temperature (about 10 degrees less) and less wear and tear.

The trade-off are that these types of pumps are heavier than its direct drive rotary vane counterparts, require more oil, and have more moving parts such as wheel and pulley.

We have many more resources on our website that you should check out

We are an Engineering Excellence Company. Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Pressure Decay Leak Testing Systems
Pressure Decay Leak Testing Systems are instruments that detect and quantify a leak by measuring the pressure drop over specified amount of time. Any specimen that is inflated will stay inflated if it is leak tight. On the other hand, of a leak exists in the inflated specimen, air will escape through the orifice and decrease the pressure inside the specimen. The higher the pressure drop, the high the leak.
Rotary Vacuum Feedthroughs
Rotary Vacuum Feedthroughs are devices that will enable you to physically rotate a specimen inside the vacuum chamber while vacuum present without decreasing the vacuum.
Our Work: Bubble Leak Testing System with a Dry off Sink used for Leak Testing Large Bags
How do you leak test Large Food Bags? This is the same question a Large Food and Beverage Processor had asked themselves because they had need for a bubble leak testing system which could be used to detect presence of leaks in their large bags. Their requirements were to test several sized bags with the largest bag being 24 inches Wide by 12 inch Deep by 9 inches High. In addition to the bubble leak testing system, they also needed a way to dry the bags after the test.
Related Articles: Force Decay Leak Testing
Force Decay Leak Testing is a very popular quantitative leak testing method used to quality test package and product integrity due to its ability to detect small leaks which cannot be seen through visual inspection. In this method, the test specimen is internally inflated by either internal pressurization or vacuum force. The inflated test specimen will, in turn, apply a force on a pressure transducer. Finally, the change in force applied by the inflated specimen over a specified time is observed.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.